Dave1234's latest activity

That was quick. Do look very white, not tan. And brand new. Be sure to shut down after running full power immediately. Best engine...

most likely it doesn't leak because the crack is not deep enough, depending the type and make up of hose, there could be a few layers...

running lean?

I just did a search for DIY fuel injection--seemed to be lots of stuff out there that might be useful--have you been there? This looks...

I think I'd try jumping the solenoid on the starter to bypass the wiring and push button, but would re-check the battery cables and the...

At the risk of asking the obvious, did you try to re-route the exhaust and muffler? Try home made double or triple wall ventilated...

This is amazing. Where did you find a retrofit for your engine, please. You didn't mention a manifold air flow sensor. I assume you...

I found a quick and easy storage box for G series machines in case anyone is interested. I had a Harbor Freight 30mm ammo box laying...

I made a video on this very topic a little while ago, you can find it here: Hope this helps.

I bought a Bobcat 742B about 3 years ago. Gas engine, rated 36 hp, but if I do the calcs right the aux Hyd power is about 15 hp. Its...

Thank you for all of them!!! I do have the repair manual, so don't need you to email it. You are great. Dave

Any chance of getting scans of those relevant to a 742B?

That component repair doc is a great help. Thank you. Makes me wonder--are there other similar Bobcat docs for other hyd components...

On my 742B, the only thing holding the front wheels down is the weight of the lift arms and attachment. If I park with the lift arms...