Recent content by countryboy

Help Support SkidSteer Forum:

  1. C

    Mini excavator size?

    I am not sure if they make them, but my 331 does have zerks.
  2. C

    Mini excavator size?

    I have a 331G and it is the most used piece of equipment I use on the farm, as far as digging stumps it does pretty good. I live in South Texas and we have mainly mesquite trees and they have a pretty tough root system.
  3. C

    Mini excavator size?

    I have a 331G and it is the most used piece of equipment I use on the farm, as far as digging stumps it does pretty good. I live in South Texas and we have mainly mesquite trees and they have a pretty tough root system.
  4. C

    2013 T650 fuel level sending unit

    Finished it today, ended up coming from the front working over the HST, had to do it all by feel. Ended up having to cut one wrench so it would fit in a confine space.
  5. C

    2013 T650 fuel level sending unit

    Got the muffler off today, but have to still get the turbo piping off. At least I can see the sensor now, I don't believe my has side access panels, but would be nice if it did. Also would be nice if my arms were a foot longer.
  6. C

    2013 T650 fuel level sending unit

    Thanks again for the info, fixing to tackle this job, one question once you get the muffler and pipe from the turbo off, can you reach the sensor with long needle nose pliers to unplug the sensor? Thanks
  7. C

    2013 T650 fuel level sending unit

    Thank You for the info
  8. C

    Chaincase square socket size???

    It should be a common ratchet drive size, I had a s185 and if I remember correctly, it was 1/2 or 3/4, if not 1 inch.
  9. C

    2013 T650 fuel level sending unit

    The reason I was asking on sending unit location is my fuel level is not reading correctly, tank is full and the gauge is reading 3/8. I wanted check and clean the connections. Thanks
  10. C

    2013 T650 fuel level sending unit

    2013 T650, where is the fuel level sending unit? It appears to be in the center of the tank on the exploded view, which is right under the engine. Looks like you have to drop the tank to get to it, hope I am wrong. Thanks in advance
  11. C

    T650

    The track, sprocket and rollers were all good, but I ran out of adjustment on the track adjustment cylinder. The bearings were good on the idlers, just worn. This was all on the right side, the left side is good to go. This was a rental machine I bought.
  12. C

    T650

    Got them from MWE off of ebay. Both of my idlers were worn down 3/4 inch.
  13. C

    T650

    Got my new idler's, front 13 3/4" and rear 11 1/2".
  14. C

    T650

    Does anybody happen to know the diameter of a new front and rear idler on a 2013 Bobcat T650, solid suspension? Thanks
See more
Top