countryboy
Member
- Joined
- Aug 29, 2020
- Messages
- 14
Does anybody happen to know the diameter of a new front and rear idler on a 2013 Bobcat T650, solid suspension? Thanks
Glad you got them, was it dealer only, or did you manage to find after market ones?Got my new idler's, front 13 3/4" and rear 11 1/2".
Got them from MWE off of ebay. Both of my idlers were worn down 3/4 inch.Glad you got them, was it dealer only, or did you manage to find after market ones?
That is a lot of wear. Are the bearings replaceable? if you catch them before they totally lock up, new bearings can't be that much, but how many people will take a track off to check every idler every few hours? By the time you notice they are locked, you already have wear on them.Got them from MWE off of ebay. Both of my idlers were worn down 3/4 inch.
The track, sprocket and rollers were all good, but I ran out of adjustment on the track adjustment cylinder. The bearings were good on the idlers, just worn. This was all on the right side, the left side is good to go. This was a rental machine I bought.That is a lot of wear. Are the bearings replaceable? if you catch them before they totally lock up, new bearings can't be that much, but how many people will take a track off to check every idler every few hours? By the time you notice they are locked, you already have wear on them.