Recent content by Captjack

I have a nice old 262b that had a really slow bucket drift for a year or so. Both Cylinders are new from cat and it still had the issue. Yesterday the drift got bad. As soon as I put joystick in neutral position the bucket starts to curl down. All other hydraulic functions seem fine. So...

Does anyone transport a 8ft snow pusher on a 7 ft wide trailer in the winter ? I have a gooseneck deck over but it has a wood dove tail and its sketchy when it gets icy out. I have a Towmaster 16 ft and a Cam tilt deck but are both 7 ft wide and have a lip around the deck that the rubber cutting...

Sorry I should have posted the out come earlier. After tracing every wire on the schematic and testing , I found the Parking Brake solenoid was bad. Replace and ran it for 8 hours - no more issues.

Well I got the 262b running but I keep blowing the interlock ecm fuse 10amp. Cat wants 3500 bucks for the part Any thing to check before I spend this kind of money on a 15 yr old machine

I lost use of joy sticks after I got machine on my trailer - was running fine all day. Got home and it fired right up and ran fine, Next morning I started it up, release parking brake, went to move it and lost controls again. Shut the machine down and went to restart it and nothing ! All lights...

Well I dont see any relays - I took every fuse out of the box today and cleaned and greased with dielectric grease just fo peace of mind going forward. I need a schematic

I have 2 switches - one does front work lights/ interior / gauge light etc - the other one does rear work lights only. Sometimes they work sometimes they dont but when they work both circuits work and when they dont they both dont. Fuses are good. Im going to get new ones anyway but... Does the...

I figured it out !

Hello, new to skid loaders. I picked up a clean 262b with 2600 hours. I was using it to mow today and cant figure out how to get the continuous flow to work on this machine. I think its the bottom left button on the left joy sack but it doesn't seem to work. I dont have a manual - any one have...