If your bobcat has the deluxe wiring harness for the cab it will be wired for the beacon all ready. All you need is the harness that plunges in behind the left pillar by the back window a rocker switch and the beacon and your good to go. Hope this helps if you need pricing let us no.
Yes, it sounds like a fuel problem. Definitely change the fuel filter. Check all fuel lines for cracks or leaks. Hope this helps. Brent www.AllSkidsteers.com
How long was it on it's side? Did you check the battery voltage? It's possible, that if it was on it's side long enough acid could have leaked out of the battery. I've seen them throw some strange codes being low on voltage. Hope this helps. Brent www.AllSkidsteers.com
This may sound strange, but try tapping on the control panel to jar it a little bit. I had a skidsteer do almost the same thing....you would tap on it and then it would start. It might at least help you get it started and get it on a trailer. Hope this helps. Brent www.AllSkidsteers.com
If your machine has the foot operated controls, I would check the linkage for wear and make sure that you are getting full throw when your moving the pedal back and forth. Also, there are rubber torsion bushings that go on the pedal, which wear out quite often. Hope this helps. Brent...