240 hydraulic pump

Help Support SkidSteer Forum:

Blaine

Active member
Joined
Nov 22, 2005
Messages
27
Anyone know where I could get a cheap used hydraulic pump. The ears the bolt the pump to the bellhousing broke off. Thanks! Blaine 770616-6379
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
If you can find out what brand the pump is, you may be able to buy after market parts for it, especially if it is a vickers pump. I have seen quite a few after market parts for vickers pumps. Failing that, you may need to sell a kidney or 2 and get it off your skid steer dealer.
 

goodtech

Well-known member
Joined
Nov 22, 2005
Messages
112
I would honestly take it down to your nearest Hydraulic repair shop and have them at least order you the part of the case that you need, and a seal and oring kit for it. All these dealerships charge way to much, for a simple pump assemble. Good luck on your search
 
OP
OP
B

Blaine

Active member
Joined
Nov 22, 2005
Messages
27
I would honestly take it down to your nearest Hydraulic repair shop and have them at least order you the part of the case that you need, and a seal and oring kit for it. All these dealerships charge way to much, for a simple pump assemble. Good luck on your search
The pump has a sticker on the side with barcodes and numbers etc. It also says Easton on it. I will definetely try some of the local hydraulic repair shops.
 
Top