bludorbronc
Well-known member
- Joined
- Oct 17, 2008
- Messages
- 58
Hi guys,I bought a 542b bobcat,when I got it the engine was gone and the wiring harness was laying there,they wanted $3000 for a new engine so I decided to adapt. I found a 20R Toyota engine and now I have it bolted to the pump. The original engine used distributorless ignition so my question is what wires do i remove to get rid of the stock ignition and what wire do I keep or extend for the Toyota?On the Toyota I have the stock bobcat alternater on the right side and the Toyota starter on the left side. And can somebody walk me thru the wiring harness from where it is attached to the body just below the tanks as to where the wire ends attach? Thanks