Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Where is the best place to get a V1702 Rebuild kit?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 12742" data-attributes="member: 82"><p>Thats a good price.</p><p>Depending on if you are able to get oversize pistons depends on if you need liners. The aftermarket kits i have used only had std pistons and ring sets so liners were needed. My liners cost me $20. The liners are only semi-finished so they will still need machining.</p><p>As for the pump, get it done! people may say it will be rite, but i don't believe that. It may still work, but is the flow still rite? does it still hold pressure? I paid $400 to get my pump checked and cleaned (fully pulled apart) and new nozzles on my injectors and pressure test to set cracking pressure. The nozzles cost me the most, i think they cost about $60 each.</p><p>I am assuming you will get an engine shop do the engine? as you need the crank ground, cam may need touching up, big ends should be re-sized. Ensure the piston to head height is checked!!!! I found my aftermarket pistons were slightly lower than OEM and the compression is slightly low causing harder starting. I can't remember exactly but it should be about .022" i have all the specs if you need them later. If needed just give me a yell.</p></blockquote><p></p>
[QUOTE="Tazza, post: 12742, member: 82"] Thats a good price. Depending on if you are able to get oversize pistons depends on if you need liners. The aftermarket kits i have used only had std pistons and ring sets so liners were needed. My liners cost me $20. The liners are only semi-finished so they will still need machining. As for the pump, get it done! people may say it will be rite, but i don't believe that. It may still work, but is the flow still rite? does it still hold pressure? I paid $400 to get my pump checked and cleaned (fully pulled apart) and new nozzles on my injectors and pressure test to set cracking pressure. The nozzles cost me the most, i think they cost about $60 each. I am assuming you will get an engine shop do the engine? as you need the crank ground, cam may need touching up, big ends should be re-sized. Ensure the piston to head height is checked!!!! I found my aftermarket pistons were slightly lower than OEM and the compression is slightly low causing harder starting. I can't remember exactly but it should be about .022” i have all the specs if you need them later. If needed just give me a yell. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Where is the best place to get a V1702 Rebuild kit?
Top