Aug 5, 2022 #1 T Ted D New member Joined Aug 5, 2022 Messages 2 hooked up grappler and aux hoses . took pin out of lever handle , but it won't move up or down
Aug 8, 2022 #2 F Firefighter Well-known member Joined Dec 31, 1969 Messages 162 possible stuck cable, If not used for a quite some time or aux solenoid not releasing u can remove solenoid at valve to check and see if its unlocking
possible stuck cable, If not used for a quite some time or aux solenoid not releasing u can remove solenoid at valve to check and see if its unlocking
Aug 9, 2022 #3 OP OP T Ted D New member Joined Aug 5, 2022 Messages 2 wow! it was stuck cable. thanks A little oil at each end of cable and a little pressure finally broke it loose. it sure felt like it was locked up. Thanks again
wow! it was stuck cable. thanks A little oil at each end of cable and a little pressure finally broke it loose. it sure felt like it was locked up. Thanks again
Aug 11, 2022 #4 F Firefighter Well-known member Joined Dec 31, 1969 Messages 162 excellent, it may need replaced
