Reply to thread

Message: <blockquote data-quote="skidsteer.ca" data-source="post: 12633" data-attributes="member: 307">I made a 4' high 4' by 6' platform that slips over my pallet forks. I use it for setting materials up on the overhead balcony that is 12 ft high in my shop. But its is also used quite a bit for anything from changing light bulbs in the shop, to helping my wife put up christmas light, pruning trees, you name it.Structural is just .100" wall sq tubing with an expanded mesh top. I made it when I had my 753 and was trying to keep the weight down. But its braced well and plenty strong for lifting 1000 lbs.The skids it sits on have a pocket for the forks to slip into, so I can load a pallet on it then pick the lift up by just driving up to it. I have a pin I drop though a hole in the skids and throught one fork tine to hold it from slipping off. I know it would not fly with the safety police, but its 100 times safer then a 14' step ladder imo.Ken</blockquote>