Reply to thread

Message: <blockquote data-quote="calypso428" data-source="post: 66083" data-attributes="member: 9027"><p>I have a 743 model ... I looked in the master manual and it doesn't seem to have any sort of bushing according to it ... Just a pin and what looks like some rubber gaskets on each side of the pin. Its got about 1/8-1/4 inch of movement (slop)  I finally got some grease thru the fittings into this joint looks like it hadn't been greased since 1991 ....</p></blockquote><p></p>