Reply to thread

Message: <blockquote data-quote="redfish1" data-source="post: 92657" data-attributes="member: 2798"><p>I know this has probably been discussed 1000 times but i am in despirate help now. I have an 1998 751 and i have got to get the seals changed on this cylinder as fast as i can. i have the seal kit and i cannot get the aluminum nut off. I started on it last night and had no success. The holes where the spanner wrench tool had been messed up by the previous owner so that is not going to work. I have it in my vice and have tried a pipe wrench on it it will still not budge. The pipe wrench is on the aluminum only and it is not on the cylinder tube and have sprayed aerokroil on it and let it sit over night and have even had the pipe wrench on it all night with a cheater pipe on it with a motor cycle strap holding pressure on it via strapping it down on my metal table. Can i heat up the end of the cylinder or will that screw up the aluminum. I really need to get this off as soon as possible, can somebody PLEASE give me an idea. Thanks</p></blockquote><p></p>