T250-300 Drive Motors

[thetool]

I have two of the old-school drive motors, with sprockets. They came off a 57 hour T300. Owner hardly uses it, warranty expired and he got nervous about the drive motors, so he upgraded.
I got the old motors and sprockets. These are for non-SJC, with no speed sensor port or ring.
These are good for someone who wants his machine driving again, as is, or you can buy updated hubs and have like-new latest build motors at a fraction of the price.
These motors should not fail if you change the hub oil and case drain filter every 500 Hrs!
They have been sealed with oil since I removed them in Feb '08.
Make an offer.

 

[T2skid]

Hi tool would these fit a 2001 T200 . I went to change my hub oil and one side was dry not good. Also what kind of oil do you recommend in the hubs manual says 10w40 but not sure on that.

 

[thetool]

Hi tool would these fit a 2001 T200 . I went to change my hub oil and one side was dry not good. Also what kind of oil do you recommend in the hubs manual says 10w40 but not sure on that.

I'm pretty sure they'll fit, but I'll make sure tommorrow or monday and post back. You're not the first guy whose manual said 10W-40, and that is so wrong. These motors take a special synthetic that you have to get from Bobcat, and change it every 500 hours.
I'll bet that info was in a TB that didn't get around, and people are losing motors over it.

 

[thetool]

I'm pretty sure they'll fit, but I'll make sure tommorrow or monday and post back. You're not the first guy whose manual said 10W-40, and that is so wrong. These motors take a special synthetic that you have to get from Bobcat, and change it every 500 hours.
I'll bet that info was in a TB that didn't get around, and people are losing motors over it.

Yes, they will fit 864, T200, T250, T300. Sprockets, too. They are the No Longer Available p/n 6675586 and sprocket p/n 6715821.

 

[thetool]

Yes, they will fit 864, T200, T250, T300. Sprockets, too. They are the No Longer Available p/n 6675586 and sprocket p/n 6715821.

And the oil-90 cc's of Mobilgear SHC XMP 150 is what it calls for in each motor. We're looking for a source on the oil-you can buy it from Bobcat p/n 7003026. They're getting about $60 for that here.

 

[siduramaxde]

And the oil-90 cc's of Mobilgear SHC XMP 150 is what it calls for in each motor. We're looking for a source on the oil-you can buy it from Bobcat p/n 7003026. They're getting about $60 for that here.

sent email

 

[thetool]

sent email

Sent one back......=)

 

[thetool]

Sent one back......=)

Motors and sprockets sold.....=).