t 750 cab tilt

[turboherb]

hi i need to do a service to a t750 skidsteer ,what is the proceedure to lift the cab to change a hydraulic filter. any info is greatly appreciated. thanks in advance.

 

[Bobcatdan]

Grab a 3/4" gearwrench. Look inside the cab towards the front. Remove bolted and rectangular washers. Lift cab. On a M series, the fan filter is behind the black cover over the hydro. Four rubber straps and it snakes out. The hydraulic filter is under the back grill. M series do not have case filters (stupid on bobcat's part).

 

[turboherb]

Grab a 3/4" gearwrench. Look inside the cab towards the front. Remove bolted and rectangular washers. Lift cab. On a M series, the fan filter is behind the black cover over the hydro. Four rubber straps and it snakes out. The hydraulic filter is under the back grill. M series do not have case filters (stupid on bobcat's part).

thanks bobcatdan for the quick reply.i changed the hyd filter under the back grill. the parts guy at bobcat said there is another one under the cab. can you confirm this?

 

[Bobcatdan]

thanks bobcatdan for the quick reply.i changed the hyd filter under the back grill. the parts guy at bobcat said there is another one under the cab. can you confirm this?

The fan filter. Look threw the cooling fan vents on the side. The hydraulic fan motor is hanging in there. The fan filter screws into the front of it.

 

[turboherb]

The fan filter. Look threw the cooling fan vents on the side. The hydraulic fan motor is hanging in there. The fan filter screws into the front of it.

thank you very much bobcatdan you have been very helpful. what a great forum;; CHEERS