Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 6237" data-attributes="member: 782"><p>I press the operate button and all but the brake light lites up , no flashes of the light , checked fuse and relay and power to the relay ok , checked for power at brake coil and find none and no power to the trigger wire of the relay , jump the hot side of the brake coil with 12 v and the brake releases , I know t-series machines have to have a signal from rpm sensor saying motor is running or you will have no power to the brake when button is depressed , so I change the rpm sensor still no light , trace the wiring and find no breaks or rubs , pretty sure the $470 panel which houses the traction lights is bad , temporary hooked up a toggle to release the brake so they can run till I figure it out for sure what the problem is , any one been here before</p></blockquote><p></p>