I am trying to get the lawn art started. I drained as much of the tank as I could with the primer bulb. It actually seemed to do a decent job. Changed out the fuel/separator. Added 5 gallons of fresh diesel.made sure the fuel lift pump was working. Bled the new filter. Checked the fuel stop with a multimeter. 15.5 on the pull and 4.5 on the hold. Does that seem right? I tried to bleed the hard lines after the injection pump but doesn't seem to be getting fuel. Next step I am going to do is take off one of the hard lines at the injection pump and see if it pumping. Just wondering if that a good idea or if I should pull the solenoid and do more testing first. I am learning as I go and just started reading up on this so please tell me if I am doing anything wrong or missing any steps. Thanks for reading and any help is appreciated.
Kubota V1505
Kubota V1505
