Reply to thread

Message: <blockquote data-quote="Jawb" data-source="post: 7370" data-attributes="member: 923"><p>i have bolt on teeth on my bucket, when i do asphalt removal i look for a weak spot on the ashpalt (large crack, or thin spot) then i slam the teeth right down into the ashpalt a few times and it starts to make a hole and that would be a good starting point, after that it should just peel right up if you can get under it with your bucket. or you could do it by hand, but that takes too much time.</p></blockquote><p></p>