Random starting issue for my S250 Bobcat

Help Support SkidSteer Forum:

14-03 is Fuel Shut off Solenoid Related, check the wiring. If the wiring is good, you might wanna look for an replacement.
I've seen some videos on that, I dont see a pull hold solenoid like other models in videos. Nothing clicks or moves when I put the ignition on. I did find a 3 wire plug that drops to a 2 wire plug going to what looks like a solenoid on the top of the fuel block that I pulled and cleaned, was a little carboned up. It now starts everytime so I can't replicate the issue at the moment. Doubt I fixed it permanently. I hate intermittent issues.
 

Attachments

  • Screenshot_20250607_193950_Ring.jpg
    Screenshot_20250607_193950_Ring.jpg
    107.8 KB · Views: 5
I've seen some videos on that, I dont see a pull hold solenoid like other models in videos. Nothing clicks or moves when I put the ignition on. I did find a 3 wire plug that drops to a 2 wire plug going to what looks like a solenoid on the top of the fuel block that I pulled and cleaned, was a little carboned up. It now starts everytime so I can't replicate the issue at the moment. Doubt I fixed it permanently. I hate intermittent issues.
That is your Fuel Shutoff Solenoid
 

Latest posts

Top