Reply to thread

Message: <blockquote data-quote="Bisonhunter" data-source="post: 52707" data-attributes="member: 6785"><p>Good idea with the cross over relief. I got a screaming deal on the blower and buying a new motor is not a problem. I am just not getting any distance out of the unit now (10 feet) and it could be the existing motor has a fair amount of wear. What I really need is distance. I'll only be blowing dry snow and when it warms up I can bucket it out of the way. I got a "snow bucket" with the bobcat but by winters end I am pinched. I think my plan will be to get the S series motor and a spare seal, see how it works and if I blow the first seal then install a crossover relief. LIke some of the guys here wrenching and learning is some of the fun especially when you end up with a known quantity that makes life easier. I'm off with the family on spring break and then will be back with some questions about the control valves for the chute. I really appreciate your time and help. Thanks</p></blockquote><p></p>