Reply to thread

Message: <blockquote data-quote="6Lstrokin" data-source="post: 30864" data-attributes="member: 3339"><p>we finally got the tracks on... 2nd side was a little easier.. haha we ended up of coarse jacking one side up at a time, putting the rear on first, then getting chain and binders hooked to the bucket to pull the front on, used a pitman arm puller to turn the hub to get the studs lined up and a pry bar to lift up and pop in place! also, the chain that is supposed to come off.... you take off the inspection cover between the front and rear axles and take the chain going to the front axle off... because supposedly it puts too much strain when turning and such on the hydraulic pump...? that was actually pretty much the easy part, biggest pain was scraping all the old silicone off! I do have one more question now though.... when you push both handles all the way forward, it pulls to the passenger side some..... also when sitting at an idle and the parking break off it tries to roll forward some.. is all this just in an adjustment in a linkage somewhere?</p></blockquote><p></p>