Hey guys, I just picked up a low hour new holland C175 and I can't figure out the aux controls. There must be something I am missing. I've got a multi-bucket hooked up, drop the pin in the right control and try to bend the controls to the left or right but it doesn't budge. Is there something more I need to do to control the aux? Hydraulic lines hooked up easily. I think I must be missing a step and can't find anything online/ no manual came with it. Thanks!
Help Support SkidSteer Forum:
Hello skidzzz- Welcome to the Forum. You might want to try re-posting your thread in the New Holland section (go to the main Forum page and scroll down to New Holland). You're in the skid steer section of BOBCAT, in the New Holland section you'll likely find help with your machine. Lots of knowledgeable guys here! Good luck! 
If the aux has not been uised for awhile the valve spool can stick. Remove the panel between your feet and you will see the linkage that attaches to the left spool. Left is determined by standing behind the machine facing forward. If everything appears to be free to that point, then spray some lubricant on the spool and gently tap the spool in. It should free up fairly easily once you get it movig.