Need seat and kick plate for L555 ASAP

[twerking]

Does anyone know where to get a seat with wiring harness and kick plate cover? They were removed by previous owner to fix the machine but ended up loosing them. Any help would be greatly appreciated!

 

[Mike10]

Looks like you are looking at about 500.00 +/- 50.00 for new parts. If you find used you may still need to buy the seat harness if it is not from a unit with the operators restraint system.

 

[irwin]

Looks like you are looking at about 500.00 +/- 50.00 for new parts. If you find used you may still need to buy the seat harness if it is not from a unit with the operators restraint system.

I just bought a seat from Northern Tool, much more comfortable than the stock http://www.northerntool.com/shop/tools/product_200268424_200268424
With a service manual you should be able to wire the safety devices up.. The seat belt is a basic style, like out of an older car.
I know the seat I bought isn't cheap, but it costs less than the stock one.

 

[mfyock]

IF you buy an aftermarket seat, dont buy one off ebay that says it uses Spray Skin Technology (SST) urethane foam. I bought one. WORST SEAT EVER. The foam is that hard it doesnt compress and I weight almost 200 lbs. It looks like its made from the expanding foam use use to insulate cracks in a house...