M2303 code

Help Support SkidSteer Forum:

OP
OP
W

will42168

New member
Joined
Nov 24, 2022
Messages
3
M2303 code
Company I work for has a fleet of bobcat S740's
I am currently stumped on one of the skid steers codes ( M2303 starter relay error OFF ).
Bobcat service dept. tells me it's either fuse , relay
or wiring issue. Both fuse and relay tested good.
Checked continuity on the wiring ( while doing the wiggle test ) good continuity. I figure last resort is to pull the harness and check for bare or broken wires. Is there a part of a circuit that I'm missing all together. Any help would be deeply appreciated !!!
Bobcat S740 skid steer ( 2019 )
 

jboymanic

New member
Joined
Jul 14, 2024
Messages
1
Did
Company I work for has a fleet of bobcat S740's
I am currently stumped on one of the skid steers codes ( M2303 starter relay error OFF ).
Bobcat service dept. tells me it's either fuse , relay
or wiring issue. Both fuse and relay tested good.
Checked continuity on the wiring ( while doing the wiggle test ) good continuity. I figure last resort is to pull the harness and check for bare or broken wires. Is there a part of a circuit that I'm missing all together. Any help would be deeply appreciated !!!
Bobcat S740 skid steer ( 2019)

Did you ever find the issue? im having the same issue
 
OP
OP
W

will42168

New member
Joined
Nov 24, 2022
Messages
3
It was the starter , the small feedback wire was only showing 10 volts.
The tech at bobcat told me it should read the same coming in as going out (12v)
Hope that helps you
 
Top