MADDADDY30
Active member
- Joined
- May 4, 2022
- Messages
- 26
Hey guys. I searched around didn't find any answers. So I have my newholland lx865 paired with thomas bh108 backhoe attachment (just brought home today) I'm going to have to figure out a way to better support it to the machine but that's later..
apon initial hookup i noticed the hydraulics not flowing thru to it without holding the auxiliary hydraulic lever...
Soo tethering the lever to allow flow thru to the backhoe attachment it runs pretty good. Possibly too good considering if you press the levers on the bh108 too fast it will damn near throw you out of the seat!! the speed and force of the pressure are so strong. Also after few minutes of operation the cylinders and hoses (fluid) are very hott.
What is wrong.??
Seems to operate smoother with machine at idle. All hoses on the bh108 are shot but indont believe that's associated with this current issue. Maybe hose i.d needs increased
Tia
apon initial hookup i noticed the hydraulics not flowing thru to it without holding the auxiliary hydraulic lever...
Soo tethering the lever to allow flow thru to the backhoe attachment it runs pretty good. Possibly too good considering if you press the levers on the bh108 too fast it will damn near throw you out of the seat!! the speed and force of the pressure are so strong. Also after few minutes of operation the cylinders and hoses (fluid) are very hott.
What is wrong.??
Seems to operate smoother with machine at idle. All hoses on the bh108 are shot but indont believe that's associated with this current issue. Maybe hose i.d needs increased
Tia
