Visit our tractor and agricultural equipment communities:

Ingersoll Forum Case IH Forum Combine Forum Hay Forum

JCB Forum John Deere Forum Kubota Forum Mahindra Forum

Massey Ferguson Talk New Holland Forum Valtra Forum Yanmar Forum

Zetor Forum Farming Forum

Reply to thread

Help Support SkidSteer Forum:

Message: <blockquote data-quote="olblue" data-source="post: 33930" data-attributes="member: 3746"><p>tractor is fixed....... First of all, I just want to say a great big thanks to everyone who commented on my post and tried to offer ideas and suggestions thanks again. Here is what I found. When the pedals locked I went straight to the seat belt and seat switches. After checking both switches, they were working properly. Then I removed the cover between your feet to get to the lock out solenoids. I unpluded the two connections and determined I had power going to both solenoids. I then cranked the machine and pluged up the solenoid that feeds the boom up and the boom raised. Next I unpluged that solenoid and pluged up the tilt solenoid and nothing happened. I then unpluged that solenoid and removed it. I got two jumper wires and tested it on a 12v battery and the solenoid worked, but the outside housing of the solenoid got hot very quick,so figured it must be shorted internally. When I called NH they had one for $201.16. Makes me wonder how they can sell them so cheap. LOL I put the new solenoid in and everything worked perfectly. I hated to spend that 200, but I have a seven year old son who is resdy to get on the machine, and I don't want an accident because I jumped out all of the safety switches. I don't want to mislead anyone on any information I have given, so if anyone knows of anything I did wrong please post it. Without having a detailed manual or wiring schematic, You just try to trouble shoot the best you know how. I'm not a NH tech, I'm just an old redneck from Georgia. I hope this info might help someone else sometime. Thanks again for everyones help. Shane</p></blockquote><p></p>

Verification