Looking for part numbers injector & clamp Deutz FL 410D for Bobcat 600

[greenbuggy]

I have an old Melroe Bobcat 600D that has a Deutz F2L 410 motor in it. One of my cylinder heads is cracked badly - and its an aluminum precup style head with multiple cracks radiating from around the steel precombustion chamber. From what I'm to understand these heads are not only NLA they're incredibly rare and prone to problems. Even if I thought this head was repairable I'd be very concerned about it cracking again. So I've found an F1L 410D motor from a Deutz scrapyard that I've bought the cylinder jug, head and piston, but injector and clamp are long gone. I realize its not ideal, but if I convert the side with the cracked head to be a 410D (D denotes "direct injection" AKA no precup head) I figure I can make this thing move under its own power until I'm able to find another D piston and head to convert the other side. I'm losing my shop space in next couple months so not having to winch this machine up onto a trailer to move it is going to be very important, sooner rather than later Where I'm stuck is that I've got no injector for this side, no Deutz parts houses or scrapyards seem to be able to reference the 410D and my local Deutz dealer can't ref serials from either the 410 I have or the 410D I've got parts off. I bought a Deutz workshop manual for the 410/411 which includes some information on the 410D, but it only tells me the Bosch nozzle part number (bosch dlla 152 s 533) and not the Deutz/KHD part number for the injector assembly. I'm happy to Paypal or Venmo someone a few bucks for helping me to find or sell me outright any of the following: - Injector or part number for an injector for a 410D - crab clamp or part number for the clamp for a 410D - Deutz "spare parts book" for a 410D, don't care if its a physical copy or scans from one (already have a spare parts book for a 410, the 410D spare parts book is a lot rarer) - another 410D cyl head, piston, cylinder jug Also looking for a ring set part number for a 410D in Std, figure I'll put new rings in this side while I've got it all apart If it matters any SN from current F2L 410: 4931789 SN from F1L 410D I have head, piston and cyl from: 5176946

 

[greenbuggy]

Also I found this image of what I believe to be an F2L 410D engine with injectors installed, this appears to be the same style as the 410D head I have and the injectors and clamps I am in need of: https://imgur.com/If8EnPl

 

[Tazza]

Also I found this image of what I believe to be an F2L 410D engine with injectors installed, this appears to be the same style as the 410D head I have and the injectors and clamps I am in need of: https://imgur.com/If8EnPl

Sadly, i think it's going to be hard for you to find one. You may be better off considering an engine swap of you can't repair the old cracked head.
I don't know how successful you can be with welding a cracked alloy head, you did say it has pre-conbustion chambers, so it may prove to be a challenge as they need to come out, weld the crack if it runs through it, then machine the holes.