Hello there, I am new to the forum and owning on or working on heavy equipment. I bought the machine last year and i have replaced battery, starter, alternator. She runs fine.
The hydraulic oil is full of water and 3 axles leak fluid. So I stripped the machine down, removed the control valves (plan to rebuild, could use pointers). Removed all 4 axles.
Now what exactly do I want with the oil seals, I keep looking online but not sure what's correct.
My measurements are 50mm od axle, 95mm id of axle housing.
So I should need seals that size? How do the 2 seals work, help please. Thabks
The hydraulic oil is full of water and 3 axles leak fluid. So I stripped the machine down, removed the control valves (plan to rebuild, could use pointers). Removed all 4 axles.
Now what exactly do I want with the oil seals, I keep looking online but not sure what's correct.
My measurements are 50mm od axle, 95mm id of axle housing.
So I should need seals that size? How do the 2 seals work, help please. Thabks
