Just registered.....hi.

Help Support SkidSteer Forum:

dkveuro

Member
Joined
Jan 25, 2007
Messages
8
I'm an old fitter ( Engineer. )..mostly European vehicles, but have over last 16years had to turn to working on Melroe VW powered Spray Coups, Cat' powered Terragator's sprayers and the Peugot diesel powered Spray Coups and Bobcats. Been mechanikin' since 1962....apart from some time off driving semi trucks through Europe for 12 years out of the UK....ran a truck shop for a few years back in the mid 70's and my own here now, in Oklahoma, since 1990. Glad to get to know you all. If it don't fit, you need a bigger hammer !
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
So very true.
I also like the one that a mechanic only needs 2 things. A can of WD40 and a roll of race tape. If it should move use WD40, if it shouldn't use the race tape.
Welcome to the forum!
 
OP
OP
D

dkveuro

Member
Joined
Jan 25, 2007
Messages
8
So very true.
I also like the one that a mechanic only needs 2 things. A can of WD40 and a roll of race tape. If it should move use WD40, if it shouldn't use the race tape.
Welcome to the forum!
Thanx Tazza....your jpg was just the ticket...going to get it in the shop Saturday and lift it up and set the steering. I'll let you know how it goes. .
 
Top