identify a door please

Help Support SkidSteer Forum:

sundown57

Well-known member
Joined
Aug 9, 2016
Messages
47
I bought a door that was supposed to fit a 763 but it doesn't. it's too wide to fit between the grab rails. but figured i would buy a glass for it and resell it. well, i went through all 7,8, and 9 series and they all have the wiper at the bottom. this one is on top. Any one have an idea what it might fit? I'm beginning to wonder ifits even bobcat.
IMG_2164.JPG
IMG_2165.JPG
IMG_2166.JPG
 

brdgbldr

Well-known member
Joined
Jun 1, 2012
Messages
1,133
You could try a Bobcat key in the door. They only have one key (why bother) so if the key doesn't work it was not made by Bobcat.
 
OP
OP
S

sundown57

Well-known member
Joined
Aug 9, 2016
Messages
47
thats an idea. ill try that in the am , thanks

couldnt wait. went out and tried it and NOPE not bobcat
 
Last edited:

laurencen

Well-known member
Joined
Oct 3, 2016
Messages
189
my door lock on the 843 is not the same as a bobcat key, figured it would be but is not, after calling bobcat and looking thro parts diagrams they have a different key, ordered a couple and good to go.

that door looks similar to my older Deere skidsteer even the placement of the wiper motor
 
Top