Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 51548" data-attributes="member: 82">Not sure what 303 is but i can't see why it would cause an issue if you drained all the oil you could and add more, run it and drain it again. This is how i clean systems that had gotten water in them.I open an aux hydraulic line, with the machine running at idle i pump all i can out into a drum and as soon as it starts to spit, i shut it off. Remove and drain the hydraulic filter. Fill with oil, run then dump again. When you have it in a state that you are happy with, replace the filter and you are all set.</blockquote>