Friesen009
New member
- Joined
- Mar 24, 2019
- Messages
- 2
Hello everyone. I have read over quite a few posts here and it seems that there are many knowledgeable people around here, so I figured I may as well join in. So here is my current issue. Just recently bought an old Hydra Mac 8B (plan a restore in the future with new motor), thing runs great for the most part, but obviously need some TLC here and there for the time being. I was going to look up some parts for the motor and low and behold someone had drilled the rivets holding the identification plate out. So I have no way to identify the motor. I was just curious if anyone has any idea what model of Onan motors were installed into Hydra Macs. I do have a few pieces of info which may help. Skid Steer Identification Plate States : Model - 8B Serial No - 4132 Engine No - NHC-MS and Intake Manifold # - 170-2966 There are some seals and such leaking on the motor which I had hoped to replace while I play around before next winter and the restore, but I would like to be sure that I am ordering the right parts. Any information would be appreciated. Thanks in advance.