Reply to thread

Message: <blockquote data-quote="Hotrod1830" data-source="post: 75522" data-attributes="member: 4331"><p>Almost forgot about the funnest part of this.  The cross tube for the pedals was rusted solid.  Prior owner just loosened the cross bolt so the pedals would move.   Tried heating with a torch but no go.  Wound up having to cut the tubes off the pedals and weld new ones on.  There is actually a smaller tube inside the pedal tubes, and a long bolt goes thru that.   You will notice the big holes in the center of the pedals.  I added grease zerks and a way to get to them.</p></blockquote><p></p>