GPM close but maybe not close enough

[rsjohnsn]

I am looking at a brush cutter that has an operational flow of 19.81-68.68 GPM or 75-260 L/min and a working pressure of 35 MPA. My math may be wrong so feel free to correct me. My TL8 shows it's output is 18.4 GPM. Am I close enough or should I look for something else? It is a great deal if it will work.

 

[foton]

i would say nope, find a different cutter or a different machine. I would try to find a cutter that 18.4 gpm is in the middle of the cutters working limits as example 15- 24 gpm.

 

[rsjohnsn]

That's what I thought but I wanted to make sure. Thanks

 

[Jared M]

i would say nope, find a different cutter or a different machine. I would try to find a cutter that 18.4 gpm is in the middle of the cutters working limits as example 15- 24 gpm.

I'd echo this. It is one of the biggest mistakes I try and talk customers out of. We find people often going with the larger attachment with the minimum rating( Flow or HP) and they are always unhappy.