Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 7901" data-attributes="member: 82">Its a good idea to grease all pivot points regularly. I don't use my machine that much so it gets done every few months. I just use molly grease, its messy as it contains molly but seems to work well.Engine oil and filter should be changed between 50 and 200 hours. My manual says 50 hours but other users in here do 200. I feel 50 isn't long enough. The oil doesn't look very dirty at 50 hours.Fuel filters should be done around 500 hours as with the main hydraulic filter from memory.Hydraulic/hydrostatic oil should be changed after about 1000 hours.These figures are just a guide! you can never over service your machine. Now if you get any signs of water contamination you must change the oil and filter straight away. If the oil looks milky this is a sign of water.I'm sure other people will have more things for you to check but this is a starting point.</blockquote>