Has anyone ever taken apart the main valve body that controls the bucket on a GEHL 4835 SXT? The control valve that raises and lowers the entire arm/bucket was sticking. I dissasembled it in order to rebuild it and the parts took forever. As a result I don't remember how the rear of the valve assembles where the detent balls are located. I know the larger ball goes into the rear of the valve over the spring and I don't remember if the small ball goes into the access holes on the side of the valve before or after the larger ball goes in. That's where I'm stuck. Does anyone no if there is a blow up diagram of the valve body anywhere on line or perhaps a service manual availabel online. Thanks, Vas