Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 41991" data-attributes="member: 82"><p>Sadly there is no easy way. I run my machine ad idle and operate the aux hydraulics till it starts to spit and jitter. Shut down and re-fill. If there is water contamination, you can put in say 5-10 litres run it, drive around, lift tilt to get the oil moving around then drain it again. Repeat till its clean. I have done this on a 753 before, it took about 3 changes to get it right.</p></blockquote><p></p>