My neighbor had a erskine 2400 snowblower sitting in the trees that he had purchased several years ago. I have no idea what it was mounted on before but the hoses and connectors were larger than the quick tach on my s300. Also the wire harness was an 8 pin I believe. Like on deere or cat. I bought an adapter from skidsteer genius to convert the electrical to work with the bobcat and swapped the hydraulic onnectors just to test the blower and see if everything worked, Which it does however the fan turns too slowly to throw the snow very far even on my high flow s300. My question is, can the motors be swapped to work on my s300 or should I just abandon this project and go buy a new one