Reply to thread

Message: <blockquote data-quote="siduramaxde" data-source="post: 4054" data-attributes="member: 248">Kudagra, goodtech, or anyone that might know,I changed the drivemotor carrier oil again today after about 100 hours of use since the last time I changed it in my t200.  The first time I changed it, one side didn't have very much oil in it at all (a few drops of black oil came out).  I filled it up with new oil and put the machine to work.  Well, when I changed it this time plenty of oil came out but it was very black on the side that priviously had little oil.  I guess this is good because the oil didn't leak out in the 100 hours but I am concerned about how dirty the oil was that came out.  Does the dirty oil indicate a problem or is it possible that since there was very little oil in there the first time it wore the bearings a bit and this made the oil dirty?  Anyone have a thought on this????Rod</blockquote>