Curl pedal

[Heatmaker]

Hey guys, I have a quick question for you. When it is cold out, My curl pedal locks up, and doesn't move in either direction( it makes it hard to to move snow) I have to put a heat gun under the floor board for 15 minutes and it works normal.. Any Ideas??

 

[farmshop]

What model lloader. Most have control cables running to the valve in back and either have debris froze around them or else.The cable get ice in them when the covering cracks. On the 2044/2054 you take for bolts out and take the cover off.between the pedals otherwise you can.take the belly pan off

 

[Heatmaker]

What model lloader. Most have control cables running to the valve in back and either have debris froze around them or else.The cable get ice in them when the covering cracks. On the 2044/2054 you take for bolts out and take the cover off.between the pedals otherwise you can.take the belly pan off

Thank you for your input Farm.. In the past, you have always steered me in the right direction.. Is the cable hard to replace on the 2044

 

[farmshop]

Thank you for your input Farm.. In the past, you have always steered me in the right direction.. Is the cable hard to replace on the 2044

Not bad I would remove the belly pan 4 bolts and the cover between the pedals and then it's only a couple bolts.