Reply to thread

Message: <blockquote data-quote="Longshot" data-source="post: 86555" data-attributes="member: 12294"><p>I am new to the board but have visited several times. I need help on my 2007 CT322. Let me start by saying I had a wiring harness issue when I first bought the machine and it had about 700 hours on it. My machine is a hand and foot and the foot pedals locked out on me. Local JD service guy came out and said it needed a new wiring harness and it was going to be about $1000 if memory serves. Maybe more. Anyway, he patched around it and I have had no further problem, until now. Just bought a brand new root grapple and hooked it up to my machine. It is the first attachment I have had on it that used aux. hydraulics. My control on the right hand steering bar is unlocked but the spool in the valve is locked up and will not move. The solenoid there has me locked out. I did take the cable from the control handle loose at the valve and the cable is free. The switch on the overhead dash doesn't release the interlock. I opened everything up, lifted the seat and there is a red wire and purple wire going to that solenoid for the aux. spool. I need help testing it backwards to see where the issue is. Worst case can I bypass the interlock? Thanks in advance for any help.</p></blockquote><p></p>