Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 15264" data-attributes="member: 82"><p>I totally understand the 24 tonne of pressure to remove the hubs. I had to remove the axle hubs on my 751, i had a 12 tonne jack and 2 x 2 tonne ones pushing from the back of the frame against the hub. I pumped them up then used a copper hammer to strike the back of the hub to get it to come free, worked REALLY well, only needed say 2-3 sharp hits and PING the hub came free.... but proceeded to land of my foot! I knew to step aside for the other 3!!!</p></blockquote><p></p>