CAT268B problem

Help Support SkidSteer Forum:

nuttybuddy

New member
Joined
Mar 27, 2007
Messages
2
Hi there I am new to this forum. I have a 2005 268B and I can't seem to get anything from the bucket controls. Just went dead suddenly. All of the hydraulic lines seem to be fine. Any suggestions or ideas on what this problem can be. Thanks
 

mikie

Active member
Joined
Feb 4, 2007
Messages
31
you lost hand controls only? you can still move the machine? make sure your seat bar is securely down but you should have a lite for that. i'll look on a schematic and see if there is a fuse you could have blown. i'll get back tonite and see if you had any luck. mikie
 

mikie

Active member
Joined
Feb 4, 2007
Messages
31
you lost hand controls only? you can still move the machine? make sure your seat bar is securely down but you should have a lite for that. i'll look on a schematic and see if there is a fuse you could have blown. i'll get back tonite and see if you had any luck. mikie
check your interlock fuse. it powers up the ecm which takes care of all the safety lockouts.
 

Latest posts

Top