Hello there to everyone in the field! It is a pleasure to join the group today! I do have a question I hope someone can help me out with? I have a Bobcat S70 for 2 weeks now (2012) with 54 hrs on it. I am looking to put tail lights and amber flashers on the rear. I saw a cable connector that is plugged (booted) on the bottom right corner. It has 3 red wires and 1 black wire into the female connector. The black and 1 of the red wires are going into a flat blade connection slot in the center. The other 2 red leads are going into a small square connector port in the corners.. Does anyone know what that connector cable is for? Was that a provision for lighting? Thanks everyone and have a good weekend! Stu
Help Support SkidSteer Forum:
SkidRoe
Well-known member
- Joined
- Dec 10, 2009
- Messages
- 1,887
Your best bet may be to talk to your dealer, he will likely know what plugs into that connector, or what it was intended for.
FWIW, my 440B never had work lights on it originally, I ended up using the unused branch for the fuel shut-off (had it been a diesel) to power my lights. Needless to say, my harness is far simpler than yours (mine doesn't even have BICS!).
HTH
FWIW, my 440B never had work lights on it originally, I ended up using the unused branch for the fuel shut-off (had it been a diesel) to power my lights. Needless to say, my harness is far simpler than yours (mine doesn't even have BICS!).
HTH
Similar threads
