Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 15843" data-attributes="member: 82">If the motor is anything like the geroler style motors bobcat use for their drive they are very simple. About 6 O rings and 3 backup rings. Line up the case drain holes and you are good to go.I don't know what they will want for a seal kit though, bobcat over here wanted $120 odd for a kit, i got the O rings for $11 per side at the local seal shop. If the backup rings are broken you will need to get the rite kit though, i was lucky and mine were in good condition.A pressure gauge is a good idea, if you spike to say 2,500 when it stalls its probably not seals.</blockquote>