Reply to thread

Message: <blockquote data-quote="skidsteer.ca" data-source="post: 2722" data-attributes="member: 307"><p>I think your 93 753 is new enough that is does not use nylon guides for the pins. If they are round (not square) then no plastic (based on my knowledge, for what its worth)(tho my 95 553 still has square and nylon slides) you can heat if needed, but you may soften the pin if you get it to hot. Just try to heat the "pipe" if you can, and I would try everytthing else first. Ken</p></blockquote><p></p>