Hello all. I have an 863 that I am having issues keeping it running. After it runs for a little bit, it barely wants to spin, turn, move, anything. I was moving a load of shot rock and i would have to stop every 5 feet and let it idle back up. If it turn it off and let it sit for 3-4 minutes it will run normal for about 5 minutes and start doing the same thing. Hydro fluid is full, fuel is half tank. Any ideas where to start diagnosis? I dont even know where to begin. I do have to add i ran it about 3 hours before it started doing this, and it was 85 degrees today. Thanks