Reply to thread

Message: <blockquote data-quote="supertech construction" data-source="post: 3496" data-attributes="member: 556"><p>ok well the forum did not help but i did talk to a guy at bobcat in las vegas,they cannot help you to disable any functions of the bics system ,but i did find out that they have a conversion to eliminate the seat sensor since they had alot of problems with this feature.all the newer versions have the new bics and i can convert mine over for about 300 dollars it completely leaves out the seat sensor and works with the seat bar when you get it and put the seat bar down you press the green button and wala,the when you leave by opening up the seat bar it disables the lift tilt functions as well as the traction lock . one thing i found out is that the old bics system is definetly dangerous,on mine it will run for about 5 minutes before it disables functionsso if you get out of the cab with in that time and accidentally hit the lift pedal you can still get squashed by the bucket ,,so much for a safety system,they apperently mentioned this and reccommended that if you have this old system to change out it will eliminate alot of the old systems problems,i will be looking at the recall pages to see if they recalled any of these you think they would because of the problems it enflicted.</p></blockquote><p></p>