Reply to thread

Message: <blockquote data-quote="dozer" data-source="post: 39045" data-attributes="member: 2576">I would be very surprised if you get 1000 hrs out of that setup. You will have to tap grease zerks on every axle tube and grease probably every 4-8 hours at least a couple pumps to make sure they stay clean. But like you said if your only putting on 100 hrs a year it will keep you running. The other thing to think about is if your axles aren't turning as smoothly you are putting extra pressure on your planetary. You do not want to ruin a planetary. I did and was super fortunate that I didn't ruin the planetary gear. It only cost me $500 in bearings. You ruin the planetary and you can kiss goodbye a smooth $3000 if you can find one.Good Luck,DOZER</blockquote>