I can hear the sensor release when I hit the brake switch like it is working but it never locks the machine up. I can even move the machine without hitting the green button after lowering the lap bar but cannot move the bucket.The parking brake is triggered by a solenoid that pulls an anchor to release it. As the machine is off, the solenoid does not work and the brake is applied. If the machine is not moving, when it is off, or when it is lit and the seatbar is raised, the problem is in the button that is under the brake pedal. If this is not the case, there are guides, discs, and anchors under the middle cover of the chains case that block the chains, which is broken there.
You must remove the middle cover of the chain case.There are guiides mounted on a cover and traction lock anchor inside traction lock solenoid. On a drive motors shafts has a 2 brake discs. Something there is broken...I can hear the sensor release when I hit the brake switch like it is working but it never locks the machine up. I can even move the machine without hitting the green button after lowering the lap bar but cannot move the bucket.
Ok. I will dig into it and see what I can findYou must remove the middle cover of the chain case.There are guiides mounted on a cover and traction lock anchor inside traction lock solenoid. On a drive motors shafts has a 2 brake discs. Something there is broken...