Reply to thread

Message: <blockquote data-quote="perry" data-source="post: 3524" data-attributes="member: 538"><p>Yes Ken, that's the one. I'm not sure what needle your talking about, after I removed the coil, I used a 1" socket to remove the 'whatever you call it', the part that's inside is about 3" long and has o-rings and it's stepped, it has no moving parts?. On the oppsite side of the aluminum block and directly in-line with what I removed, there is another 'whatever you call iy', this was also removed with a 1'' socket, the inside part has a round shaft with holes and a plunger inside that probably moves. I cleaned them and noticed no damaged or dirt, reinstalled, hooked everything backup and still nothing. Can I check the coil while it's removed?, I don't want to put 12 volts to it when it normally gets 7.5 volts.</p></blockquote><p></p>